The cutting timing of the knife can be adjusted by moving the installed position of the knife tripping segment which is installed on the upper surface of the feed cam. When the set screw is loosened and moved toward the direction of the arrow, the cutting timing of the knife will be retarded. Adjust it so that the knife will cut 2-^3 stitches before the machine stops. After adjusting, tighten the screw firmly.

If your Juki 761 / 762 / 763 Buttonhole is creating problems related to cutter then you are at the right place. I have fully described that why your Juki 761 /762 /763 Buttonhole's Cutter is missing, falling without your will, not working according to your will, falling with very high speed or any other problem related to your Juki 761 ,Juki 762 , Juki 763  even Juki 781 etc . You should not worry. Just follow my instructions which I have explained to you fully. You will see satisfactory results . I have made this video very simple. You should follow the steps which I have told you. You can also watch my videos on Youtube also. Here is a link "Alshamasrepairing"